Punisher XP 6S 1/8 Monster Truck LWB RTR Brushless COR00171

Punish the Competition with Team Corally's Punisher XP 6S Monster Truck!

A 1/8 scale Monster Truck is the choice of serious bashers because of their incredible top speeds and the ability to handle virtually any type of track, surface, or terrain. Team Corally's Punisher XP 6S 4WD 1/8 Scale Brushless Monster Truck RTR is based on the same platform as the acclaimed Kronos XP 6S, adding a newly-designed body, graphics package, wheels and tires. Able to handle massive 6S LiPo power and including a 2050KV brushless motor, you can utterly dominate lesser models at your local track, skate park or bash spot. With its aggressive appearance, race-inspired design, and plush suspension the Punisher XP 6S can tackle to the most challenging conditions or terrain.

With fully independent suspension, durable all-metal four-wheel drivetrain, racing chassis, stump-pulling power, and aerodynamic racing bodyshell design, the Punisher XP 6S may be the ultimate electric 1/8 scale Monster Truck for drivers looking for an unmatched bashing experience.

All-Season Driving, Anytime and Anywhere
The Team Corally Punisher XP 6S Monster Truck features a full complement of water-resistant electronics, so it's ready for driving in most any conditions. Not only is the ESC resistant to splashes of water and mud, but the steering servo and receiver are also protected from the elements by special water-resistant PCB coatings. The receiver is further protected by a sealed enclosure to protect against dust, mud, and moisture. Of course, aerospace-quality rubber sealed ball bearings are standard on the Punisher XP 6S, meaning you can drive virtually anywhere and in most any conditions
(Please note: no RC vehicle should be driven or submerged in water or mud. Take care when driving in extreme conditions, and proper maintenance such as cleaning and lubricating should take place after driving in mud, water or near salt water.)

Racing Style Chassis for Extreme Performance
Inspired by top-tier professional racing machines in the RC industry, the Punisher XP 6S 6S utilizes an aluminium pan-style chassis for the most efficient and durable chassis layout. With an optimized forward weight bias, the heaviest drivetrain components and other systems are kept as close to the front as possible. Robust, triangulated front and rear chassis braces provide additional rigidity that allows the aluminium big bore shocks and HiCC8 composite suspension parts to perform without the negative effects of chassis plate flex. The reinforced composite chassis side guards have integrated front brackets to provide additional protection for the polycarbonate body and electronics. The exclusive Team Corally's exclusive SPL system secures shock spring perches and prevents spring misalignment during extreme compression/rebound while the innovative RSP Sway Bar system keeps the Punisher planted in corners and ensures consistent handling on all surfaces.

Massive 2050KV Brushless Power
With a Team Corally Kuron 2050KV 4-pole motor mounted on a torsion-resistant aluminium 2-piece sliding mount, you can be confident of attaining maximum speeds for big-air stunts! The motor is fitted with a hardened steel pinion gear, which mates to a hardened steel spur gear on the center differential.
Looking to achieve remarkable top speeds with a pull of the trigger? Speeds of over 110 km/h (70+ mph) are easy - just fit the appropriate battery!

LiPo Power Ready
The battery holder of the Punisher can fit batteries packs in all the popular sizes and is adjustable for maximum versatility. The versatile Team Corally Kuron 2050KV motor can utilize 4S-6S LiPo batteries to optimize performance on any surface or in any conditions!

Durable Steel Drive System with Three Fluid-Filled Differentials
As usually seen only on premium competition-level RC vehicles, the Punisher is fitted with front, center, and rear silicone fluid-filled and sealed limited-slip differentials that ensure the full amount of power from the 2050KV Kuron motor gets to the ground. With easy removal and maintenance, you can even alter each differential individually to fine-tune the amount of traction at either end of the truggy! Inside, you'll find a complete set of metal gears and outdrive cups that connect to steel central driveshafts. The front end is driven by CVD driveshafts, while the rear is driven by robust metal dogbones, with the entire drivetrain supported by aerospace-quality 8x16x5mm rubber sealed ball bearings for maximum efficiency and durability.

Premium Alloy/Steel Center Differential Assembly
The critical center diff used on the Punisher XP 6S features an aluminium alloy case and durable, steel spur gear for unsurpassed performance and reliability. The metal case allows optimal alignment of the internal gear assembly through improved heat dissipation and reducing fluid loss, while the steel spur gear ensures maximum power delivery and resistance to damage from dirt or debris.

Skid Plates and Braces
The Punisher includes enhanced front and rear composite skid plates to protect the chassis and critical suspension components, especially during insane big-air jumps. The rear wing mount features additional bracing to maintain proper wing alignment during the most severe jumps and occasional tumbles, while the additional front upper arm brace keeps critical suspension components properly aligned during the harshest bashing use.

Adjustable Battery Mount
The innovative battery mount allows the Punisher XP 6S to conveniently secure most any 4S-6S LiPo made for surface vehicles, protecting your battery investment, while providing optimum weight distribution.

Optimized Racing Suspension
The Punisher XP 6S features a robust pivot ball-style front suspension utilizing steel pivots and steering turnbuckles in addition to durable composite suspension arms. The rear suspension features composite outboard hubs and one-piece composite upper suspension links. At each corner, durable HiCC8 composite suspension arms and threaded, adjustable 16mm big bore oil-filled shock absorbers produce plush, compliant handling.

Multi-Block Stunt Tyres
The grippy rubber tyres are designed specifically for monster bashing, featuring foam inner liners and glued on aggressive-looking honeycomb spoke wheels on 17mm hex drive hubs. The aggressive tread pattern in combination with the low-profile sidewall design minimizes ballooning and provides maximum grip for maximum grip and control on all terrain.

Varioprop S2R Steering Wheel Controller
The Punisher is fully controlled by the ergonomically designed pistol-grip style radio transmitter, which features the latest 2.4GHz technology for interference-free control at a distance of 300m. The realistic steering wheel design makes driving intuitive and comfortable. The pistol grip trigger provides perfect control of the throttle, with forward and reverse controls combined in a single control. Learning how to control the Punisher is quick and easy with the S2R controller!

The Punisher XP 6S RTR is an exciting, impressive all-terrain machine! If you're looking to make an all-out assault on lesser cars with speed and jumping capability that other cars simply cannot duplicate, then look no further than the Punisher XP 6S RTR from Team Corally.

Punisher Features:
100+ km/h (60+ mph) possible
Factory-built 1/8 scale competition-capable truggy with electronics, bodyshell and tyres installed
Team Corally TOROX 185 ESC 4-6S with LiPo low-voltage protection (programmable)
Team Corally Kuron 2050kV 4-pole brushless motor (4-6S operation)
Varioprop CRHV-7225 High Torque, High Voltage Digital Servo with Metal Gears and 25Kg Torque
Ergonomic Varioprop S2R transmitter, with interference-free 2.4GHz technology
Aluminium servo arm for precision and strength
3mm 7075 Aluminum Steering Ackermann Plate
Separate splash-proof and dust proof electronic box with transponder mount
Adjustable battery holder for all common LiPo batteries
Full set of aerospace-quality, rubber-sealed ball bearings
Oversized 8 x 16 x 5mm transmission ball bearings
Hardened steel spur gear and motor pinion
Three sealed metal differentials individually filled with silicone fluid
Aluminum/Steel center differential
Quick and convenient diff access
2-piece aluminium motor mount with composite gear cover
52T Steel Spur Gear
Completely Hard-coated metal drive train
Extra Surface-Hardened Steel Front CVD Joints
Aluminium 17 mm drive hexes
Oil-filled threaded 16 mm aluminium Big Bore shocks
Exclusive shock spring perch locking system
CNC aluminium shock towers, 5mm rear / 4mm front
Alloy Front Upper Arm Stiffener Plate
Independent Pivot Ball front suspension
Independent double wishbone rear suspension
Optimized, custom engineered composite parts
Heavy-Duty one-piece composite suspension links and tie rods
Aluminium suspension mounts with composite cover
Team Corally RSP front and rear anti-roll bar system
Aluminium chassis plate
Heavy Duty front and rear chassis braces
Reinforced chassis side guards with integrated body protection
Front bumper with additional impact-absorbing chassis protection
Reinforced High Downforce Wing and Wing Mount
Factory-glued high-speed, low-profile tyres on black multi-spoke composite wheels
Durable and attractive printed polycarbonate body
Many optional tuning parts available for individual customization